manualshive.com logo in svg

Hyundai 2013 Azera, Owner'S Manual

Share
Download
Hyundai 2013 Azera Owner'S Manual Download Page 384

Maintenance

72

7

License plate light bulb replace-
ment 

1. Turn off the engine.
2. Loosen the retaining screws with a

philips head screwdriver.

3. Remove the bulb assembly by turning

it counterclockwise.

4. Remove the bulb by pulling it straight

out.

5. Install a new bulb.
6. Reinstall the bulb assembly securely

with the retaining screws.

Interior light bulb replacement

Glove box lamp, sunvisor lamp and
luggage lamp

1. Using a flat-blade screwdriver, gently

pry the lens from the interior light
housing.

2. Remove the bulb by pulling it straight

out.

3. Install a new bulb in the socket.
4. Align the lens tabs with the interior

light housing notches and snap the
lens into place.

■

Glove box lamp

■

Sunvisor lamp

■

Luggage lamp

OHG070039

OHG070033/OHG070032/OHG070034

WARNING 

Prior to working on the Interior
Lights, ensure that the “OFF” but-
ton is pressed to avoid burning
your fingers or receiving an electric
shock.

CAUTION

Use care not to dirty or damage
lens, lens tab, and plastic housings.

Summary of Contents for 2013 Azera




















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands