manualshive.com logo in svg

Hyundai 2013 Azera, Owner'S Manual

Share
Download
Hyundai 2013 Azera Owner'S Manual Download Page 21

Safety features of your vehicle

6

3

Forward and backward

1. Push the control switch forward or

backward to move the seat to the
desired position.

2. Release the switch once the seat

reaches the desired position.

Seatback angle

1. Push the upper part of the control

switch forward or backward to move
the seatback to the desired angle.

2. Release the switch once the seat

reaches the desired position.

Seat cushion height (for driver’s seat)

1. Pull the front portion of the control

switch up to raise or down to lower the
front part of the seat cushion. Pull the
rear portion of the control switch up to
raise or down to lower the rear part of
the seat cushion.

2. Release the switch once the seat

reaches the desired position.

OHG030007

OHG030008

OHG030009

Summary of Contents for 2013 Azera




















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands