manualshive.com logo in svg

Hyundai 2009 Tucson, Owner'S Manual, Page: 218 / 273

Share
Download
Hyundai 2009 Tucson Owner'S Manual Download Page 218

6

DO-IT-YOURSELF MAINTENANCE

14

CHECKING THE BRAKES

!

G120B01A-AAT

Checking the Brake Fluid Level

WARNING:

Use caution when handling brake fluid. It
can damage your vision if it gets into
your eyes. It will also damage your
vehicle's paint if spilled on it and not
removed immediately.

!

WARNING:

The cooling fan is controlled by engine
coolant temperature and may some-
times operate even when the engine is
not running. Use extreme caution when
working near the blades of the cooling
fan, so that you are not injured by a
rotating fan blade. As the engine coolant
temperature decreases, the fan will au-
tomatically shut off. This is a normal
condition.

G120A01A-AAT

CAUTION:

Because brakes are essential to the
safe operation of the car, it is suggested
that they be checked and inspected by
your Hyundai dealer. The brakes should
be checked and inspected for wear at
those intervals specified in the vehicle
maintenance schedule in Section 5.

!

G120C02A-AAT

Recommended Brake Fluid

Use only hydraulic brake fluid conforming
to DOT 3 or DOT 4 specifications in your
braking system. Follow the instructions
printed on the container.

Summary of Contents for 2009 Tucson


















































































































































































































































































Reviews:

No comments