manualshive.com logo in svg

Hyundai 2009 Tucson, Owner'S Manual, Page: 10 / 273

Share
Download
Hyundai 2009 Tucson Owner'S Manual Download Page 10

F9

1.

Panel Brightness Control Knob (Rheostat Switch)

2.

4WD Lock Switch (If installed)

3.

Traction Control System (TCS) Switch (If installed) /
Electronic Stability Control (ESC) Switch (If installed)

4.

Instrument Cluster

5.

Multi-Function Light Switch (If installed)

6.

Front Window Defroster (If installed) / Aux Outlet (If
installed)

7.

Hazard Warning Light Switch

8.

Digital Clock

9.

Windshield Wiper/Washer Switch

10. Rear Defroster and Outside Rearview Mirror Heater Switch

(If installed)

11. Front Fog Light Switch (If installed)
12. Passenger's Airbag
13. Hood Release Lever
14. Horn and Driver's Airbag
15. Small Article Tray / Ashtray (If installed)
16. Cruise Control Switch (If installed)
17. Heating/Air Conditioning Control Panel (If installed)
18. Shift Lever (If installed)
19. Glove Box

CAUTION:

When installing a container of liquid air freshener inside the vehicle, do not place it near the instrument cluster
nor on the instrument panel surface. If there is any leakage from the air freshener onto these areas
(Instrument cluster, instrument panel or air ventilator), it may damage these parts. If the liquid from the air
freshener does leak onto these areas, wash them with water immediately.

!

Summary of Contents for 2009 Tucson


















































































































































































































































































Reviews:

No comments