manualshive.com logo in svg

Hyundai 2009 Tucson, Owner'S Manual, Page: 171 / 273

Share
Download
Hyundai 2009 Tucson Owner'S Manual Download Page 171

3

2

WHAT TO DO IN AN EMERGENCY

IF THE ENGINE WILL NOT START

!

D010A01A-AAT

D010B02A-AAT

If Engine Doesn't Turn Over or Turns
Over Slowly

D010C02Y-AAT

If Engine Turns Over Normally but
Does Not Start

1. Check fuel level.
2. With the  key in the "OFF" position, check

all connectors at ignition, coil and spark
plugs. Reconnect any that may be dis-
connected or loose.

3. Check the fuel line in the engine com-

partment.

4. If the engine still does not start, call a

Hyundai dealer or seek other qualified
assistance.

D010D01A-AAT

If Engine Stalls While Driving

1. Reduce your speed gradually, keeping

a straight line. Move cautiously off the
road to a safe place.

2. Turn on your emergency flashers.
3. Try to start the engine again. If your ve-

hicle will not start, contact a Hyundai
dealer or seek other qualified assistance.

WARNING:

If the engine will not start, do not push or
pull the car to start it. This could result in
a collision or cause other damage. In
addition, push or pull starting may cause
the catalytic converter to be overloaded
and create a fire hazard.

1. If your car has an automatic transaxle,

be sure the gear selector lever is in "N"
or "P" and the emergency brake is set.

2. Check the battery connections to be

sure they are clean and tight.

3. Turn on the interior light. If the light dims

or goes out when you operate the starter,
the battery is discharged.

4. Check the starter connections to be

sure they are securely tightened.

5. Do not push or pull the vehicle to start it.

See instructions for "Jump Starting".

HJM5008

D010F01A-AAT

If the engine stalls at a crossroad or
crossing

If the engine stalls at a crossroad or cross-
ing, set the shift lever in the N(Neutral)
position and then push the vehicle to a safe
place.

Summary of Contents for 2009 Tucson


















































































































































































































































































Reviews:

No comments