manualshive.com logo in svg

Hyundai 2009 Azera, Owner'S Manual, Page: 34 / 335

Share
Download
Hyundai 2009 Azera Owner'S Manual Download Page 34

1

FEATURES OF YOUR HYUNDAI

21

B081D01TG-AAT

Forward and Backward Headrest
Adjustment

The headrest may be adjusted forward to
3 different positions by pulling the head-
rest forward to the desired detent. To ad-
just the headrest to it’s furthest backwards
position, pull it fully forward to the farthest
position and release it. Adjust the headrest
so that it properly supports the head and
neck.

HTG2045

B083D02NF-AAT

Active Headrests (If Installed)

The active headrest is designed to move
forward and upward during a rear impact.
This helps to prevent the driver's and front
passenger's head from moving backward
and thus helps minimize neck injuries.

HNF2041-1

o Do not operate vehicle with the head-

rests removed as severe injury to the
occupants may occur in the event of
an accident. Headrests may provide
protection against neck injuries when
properly adjusted.

o Do not adjust the headrest position of

the driver's seat while the vehicle is in
motion.

Summary of Contents for 2009 Azera
















































































































































































































































































































































Reviews:

No comments