Hyundai 2009 Azera Owner'S Manual Download Page 275

Page: 275 / 335

DO-IT-YOURSELF MAINTENANCE

CAUTION:

o Do not operate the wipers on dry glass.

This can result in more rapid wear of
the wiper blades and may scratch the
glass.

o Keep the blade rubber out of contact

with petroleum products such as en-
gine oil, gasoline, etc.

HHR5049

G080B01TG-GAT

REPLACING THE WINDSHIELD
WIPER BLADES

Replacing driver's side windshield
wiper blade

To replace the wiper blades, raise the
wiper to the vertical position.

To remove the wiper blade

1. Push down the wiper blade with the

locking clip (1) pressed to detach it from
the wiper arm.

HHR5048

(1)

2. Raise the wiper blade lightly and pull it

up.

Summary of Contents for 2009 Azera
















































































































































































































































































































































Search results

Summary of Contents for 2009 Azera

Reviews:

Hyundai 2009 Azera, Owner'S Manual, Page: 275 / 335

Search results

Summary of Contents for 2009 Azera

Reviews: