manualshive.com logo in svg

Hyundai 2009 Azera, Owner'S Manual, Page: 112 / 335

Share
Download
Hyundai 2009 Azera Owner'S Manual Download Page 112

1

FEATURES OF YOUR HYUNDAI

99

!

CAUTION:

o Do not operate the switch continu-

ously for an unnecessary length of
time.

o Scraping ice from the mirror face could

cause permanent damage. To remove
any ice, use a sponge, soft cloth or
approved de-icer.

!

WARNING:

Be careful when judging the size or dis-
tance of any object seen in the passen-
ger side rearview mirror. It is a convex
mirror with a curved surface, and any
objects seen in this mirror are closer
than they appear.

B510C01TG-AAT

FOLDING THE OUTSIDE REARVIEW
MIRRORS (Manual Type)

To fold the outside rearview mirrors, push
them towards the rear.
The outside rearview mirrors can be folded
rearward for parking in narrow areas.

B510C01TG-A

The outside rearview mirror heater is actu-
ated in connection with the front/rear win-
dow defroster. To heat the outside rear-
view mirror glass, push in the switch for the
front/rear window defroster. The rearview
mirror glass will be heated for defrosting or
defogging and will give you improved rear
vision in inclement weather conditions.
Push the switch again to turn the heater off.
The outside rearview mirror heater auto-
matically turns itself off after 20 minutes.

B510D02HP-AAT

OUTSIDE REARVIEW MIRROR
HEATER (If Installed)

B380A02TG-A

Summary of Contents for 2009 Azera
















































































































































































































































































































































Reviews:

No comments