1
FEATURES OF YOUR HYUNDAI
182
1. CD loading slot
Please face printed side upward and gen-
tly push in. When the ignition switch is on
ACC or ON and power is off, power is
automatically turned on if the CD is loaded.
This CDP supports only 12cm CD. If VCD,
Data CD are loaded, "Reading Error"
message will appear and CD will be
ejected.
2. CD Indicator
If the LOAD button is pressed, this indicator
will begin to blink.
3. CD eject Button
Push button to eject the CD. This button
is enabled when ignition switch is off.
4. CD LOAD Button
Push [LOAD] button to load CDs to avail-
able CDC deck (from 1~6). Push [LOAD]
button for more than 2 seconds to load into
all available decks.
The last CD will play. 10 seconds idle
status will disable loading process.
5. AUX Selection Button
If the auxiliary device is connected, it turns
to AUX MODE to play the sound from the
auxiliary player.
If no auxiliary device is connected, it dis-
plays "NO CONNECT" for 3 seconds and
returns to the previous mode."
6. Automatic Track Selection Button
o Push [SEEK
] button for less than 0.8
second to play from the beginning of
current song.
o Push [SEEK
] button for less than 0.8
second and press again within 3 sec-
onds to play the previous song.
o Push [SEEK
] button for 0.8 or longer
to initiate reverse direction high speed
sound search of current song.
o Push [SEEK
] button for less than 0.8
second to play the next song.
o Push [SEEK
] button for 0.8 or longer
to initiate high speed sound search of
current song.
7. INFO Button
Displays the information of the current CD
TRACK in the order of DISC TITLE
➟
DISC
ARTIST
➟
TRACK TITLE
➟
TRACK ARTIST
➟
TOTAL TRACK
➟
Play Screen
➟
DISC
TITLE
➟
···.(not displayed if the information
is not available on the DISC.)
8. TUNE/ENTER Button
Turn this button clockwise to display songs
after current song.
Also, turn this button counterclockwise to
display songs before current song.
To listen to the displayed song, press the
button to skip to the song and play.
Pressing the button changes the BASS,
MIDDLE, TREBLE, FADER and BALANCE
TUNE mode. The mode selected is shown
on the display. After selecting each mode,
rotate the Audio control knob clockwise or
counterclockwise.
o BASS Control
To increase the BASS, rotate the knob
clockwise, while to decrease the BASS,
rotate the knob counterclockwise.
o MIDDLE Control
To increase the MIDDLE, rotate the knob
clockwise, while to decrease the MIDDLE,
rotate the knob counterclockwise.
o TREBLE Control
To increase the TREBLE, rotate the knob
clockwise, while to decrease the TREBLE,
rotate the knob counterclockwise.
Summary of Contents for 2009 Azera
