manualshive.com logo in svg

Hyundai 2009 Accent, Owner'S Manual

The Hyundai 2009 Accent Owner's Manual is a comprehensive guide to help you get the most out of your vehicle. It covers everything from maintenance and troubleshooting to vehicle features and operation. You can easily download this manual for free from manualshive.com, ensuring you have all the necessary information at your fingertips.

Share
Download
background image

3

WHAT TO DO IN AN EMERGENCY

3

JUMP STARTING

D010D01A-AAT

If the Engine Stalls While Driving

1. Reduce your speed gradually, keep-

ing a straight line. Move cautiously off
the road to a safe place.

2. Turn on your emergency flashers.
3. Try to start the engine again. If your

vehicle will not start, contact a Hyundai
dealer or seek other qualified assis-
tance.

!

D020A02A-AAT

WARNING:

The gas produced by the battery during
the jump-start operation is highly ex-
plosive. If these instructions are not
followed exactly, serious personal in-
jury and damage to the vehicle may
occur! If you are not sure how to follow
this procedure, seek qualified assis-
tance. Automobile batteries contain sul-
furic acid. This is poisonous and highly
corrosive. When jump starting, wear
protective glasses and be careful not to
get acid on yourself, your clothing or on
the car.

D020A02MC

o If you should accidentally get acid on

your skin or in your eyes, immediately
remove    any contaminated clothing
and flush the area with clear water for
at least 15 minutes. Then promptly
obtain medical attention. If you must
be transported to an emergency facil-
ity, continue to apply water to the af-
fected area with a sponge or cloth.

o The gas produced by the battery dur-

ing the jump-start operation is highly
explosive. Do not smoke or allow a
spark or open flame in the vicinity.

o The battery being used to provide the

jump start must be 12-volt. If you can-
not determine that it is a 12-volt bat-
tery, do not attempt to use it for the
jump start.

o To jump start a car with a discharged

battery, follow this procedure exactly:

1. If the booster battery is installed in

another vehicle, be sure the two ve-
hicles are not touching.

2. Turn off all unnecessary lights and

accessories in both vehicles.

F020100AUN-EU

If the Engine Stalls at a Crossroad or
Crossing

If the engine stalls at a crossroad or
crossing, set the shift lever in the
N(Neutral) position and then push the
vehicle to a safe place.

Summary of Contents for 2009 Accent











































































































































































































































































Reviews:

No comments

Related manuals for 2009 Accent

VEAP SHIELD UNITED FT Series Mounting Instruction preview
FT Series
Brand: VEAP SHIELD UNITED Pages: 3
Kathrein DDA Series User Manual preview
DDA Series
Brand: Kathrein Pages: 7
Yakima Q46 Installation Instructions preview
Q46
Brand: Yakima Pages: 4
Code 3 21 COVERT Series Installation And Operation Instructions Manual preview
21 COVERT Series
Brand: Code 3 Pages: 16
Ford 2008 Mustang Quick Reference Manual preview
2008 Mustang
Brand: Ford Pages: 2
Carcomm CNM-71 Quick Start Manual preview
CNM-71
Brand: Carcomm Pages: 2
Whispbar K392W Fitting Instructions For Basic Carrier preview
K392W
Brand: Whispbar Pages: 14
WABCO TP19108 Installation Manual preview
TP19108
Brand: WABCO Pages: 32
GMC 2013 GMC Savana Owner'S Manual preview
2013 GMC Savana
Brand: GMC Pages: 398
Veldo Teknoloji DUCATO Manual preview
DUCATO
Brand: Veldo Teknoloji Pages: 32
Wagan Easy Air Auto Screen User Manual preview
Easy Air Auto Screen
Brand: Wagan Pages: 8
Pontiac 2007 G6 Owner'S Manual preview
2007 G6
Brand: Pontiac Pages: 486
Subaru SPN0001105 User Manual preview
SPN0001105
Brand: Subaru Pages: 44
Toyota 2012 Sienna Owner'S Manual preview
2012 Sienna
Brand: Toyota Pages: 779
Porsche BOXTER - Technical Manual preview
BOXTER -
Brand: Porsche Pages: 146
Autoplugin RCP-B1 Installation Manual preview
RCP-B1
Brand: Autoplugin Pages: 8
Great day UVFR751 Instructions For Installation And Use preview
UVFR751
Brand: Great day Pages: 5
Chevrolet 1995 C/K Pickup Owner'S Manual preview
1995 C/K Pickup
Brand: Chevrolet Pages: 483

Brands by name

Popular brands

Load more brands