manualshive.com logo in svg

Hyundai 2009 Accent, Owner'S Manual

The Hyundai 2009 Accent Owner's Manual is a comprehensive guide to help you get the most out of your vehicle. It covers everything from maintenance and troubleshooting to vehicle features and operation. You can easily download this manual for free from manualshive.com, ensuring you have all the necessary information at your fingertips.

Share
Download
background image

7

EMISSION CONTROL SYSTEMS

2

EMISSION CONTROL SYSTEM

Canister

Fuel vapors generated inside the fuel
tank are absorbed and stored in the
onboard canister. When the engine is
running, the fuel vapors absorbed in the
canister are drawn into the induction sys-
tem through the purge control solenoid
valve.

Purge Control Solenoid Valve (PCSV)

The purge control solenoid valve is con-
trolled by the Engine Control Module
(ECM); when the engine coolant tem-
perature is low during idling, the PCSV
closes so that evaporated fuel is not taken
into the engine. After the engine warms-
up during ordinary driving, the PCSV
opens to introduce evaporated fuel to the
engine.

H010B01A-AAT

1. Crankcase Emission Control

System

The positive crankcase ventilation sys-
tem is employed to prevent air pollution
caused by blow-by gases being emitted
from the crankcase. This system supplies
filtered fresh air to the crankcase through
the air intake hose. Inside the crankcase,
the fresh air mixes with blow-by gases,
then passes through the PCV valve into
the induction system.

H010A01A-AAT

Your Hyundai is equipped with an emis-
sion control system to meet all require-
ments of the U.S. Environmental Protec-
tion Agency or California Air Resources
Board.
There are three emission control systems
which are as follows.

1) Crankcase Emission Control System
2) Evaporative Emission Control System
3) Exhaust Emission Control System

In order to ensure the proper function of
the emission control systems, it is recom-
mended that you have your car inspected
and maintained by an authorized Hyundai
dealer in accordance with the mainte-
nance schedule in this manual.

H010D01A-AAT

3. Exhaust Emission

Control System

The Exhaust Emission Control System is
a highly effective system which controls
exhaust emissions while maintaining
good vehicle performace.

H010C01S-AAT

2. Evaporative Emission Control (In-

cluding ORVR: Onboard Refuel-
ing Vapor Recovery) System

The Evaporative Emission Control Sys-
tem is designed to prevent fuel vapors
from escaping into the atmosphere.
(The ORVR system is designed to allow
the vapors from the fuel tank to be loaded
into a canister while refueling at the gas
station, preventing the escape of fuel
vapors into the atmosphere.)

Summary of Contents for 2009 Accent











































































































































































































































































Reviews:

No comments

Related manuals for 2009 Accent

Laser 4832 Manual preview
4832
Brand: Laser Pages: 8
Yakima KingJoe 2 Quick Start Manual preview
KingJoe 2
Brand: Yakima Pages: 7
Yakima BowDown Quick Start Manual preview
BowDown
Brand: Yakima Pages: 6
Yakima LOCKN'LOAD Manual preview
LOCKN'LOAD
Brand: Yakima Pages: 10
Yakima HitchSki Quick Start Manual preview
HitchSki
Brand: Yakima Pages: 12
Oldsmobile 2004 Alero Quick Manual preview
2004 Alero
Brand: Oldsmobile Pages: 2
VDO RUDDER ANGLE INDICATOR Installation Instructions Manual preview
RUDDER ANGLE INDICATOR
Brand: VDO Pages: 8
Chevrolet 1996 Cavalier Owner'S Manual preview
1996 Cavalier
Brand: Chevrolet Pages: 372
Volvo V70XC Cross country 1998 Owner'S Manual preview
V70XC Cross country 1998
Brand: Volvo Pages: 262
Cadillac 54-6219 1954 Shop Manual preview
54-6219 1954
Brand: Cadillac Pages: 409
Fortin THAR-AUD1 Manual preview
THAR-AUD1
Brand: Fortin Pages: 9
Mobility Networks RPH 35.13 Use And Maintenance Manual preview
RPH 35.13
Brand: Mobility Networks Pages: 52
GMC TopKick 2007 Owner'S Manual preview
TopKick 2007
Brand: GMC Pages: 430
Thule PORTAGE 819 Instructions Manual preview
PORTAGE 819
Brand: Thule Pages: 12
Cadillac GMC Yukon Denali 2005 Owner'S Manual preview
GMC Yukon Denali 2005
Brand: Cadillac Pages: 456
Saab 900 5 Speed Technical Training Manual preview
900 5 Speed
Brand: Saab Pages: 63
R&G LP0291BK Fitting Instructions Manual preview
LP0291BK
Brand: R&G Pages: 20
Whispbar S17W Fitting Instructions Manual preview
S17W
Brand: Whispbar Pages: 70

Brands by name

Popular brands

Load more brands