manualshive.com logo in svg

Hyundai 2008 Accent, Owner'S Manual

The Hyundai 2008 Accent Owner's Manual is a comprehensive guide for owners of this reliable compact car. Designed to assist users in understanding their vehicle's features, maintenance, and troubleshooting, this manual is available for free download at manualshive.com. Obtain the necessary information to maximize your Hyundai Accent's performance and longevity.

Share
Download
background image

1

FEATURES OF YOUR HYUNDAI

58

B240D02NF-AAT

Additional Safety Precautions

o

Never let passengers ride in the
cargo area (trunk) or on top of a
folded-down back seat.

 All occupants

should sit upright, fully back in their
seats with their seat belts on and their
feet on the floor.

o

Passengers should not move out of
or change seats while the vehicle is
moving.

 A passenger who is not wear-

ing a seat belt during a crash or emer-
gency stop can be thrown against the
inside of the vehicle, against other
occupants, or out of the vehicle.

o

Each seat belt is designed to re-
strain one occupant. 

If more than one

person uses the same seat belt, they
could be seriously injured or killed in
a collision.

o

Do not use any accessories on seat
belts.

 Devices claiming to improve oc-

cupant comfort or reposition the seat
belt can reduce the protection pro-
vided by the seat belt and increase the
chance of serious injury in a crash.

!

WARNING:

o No objects should be placed over or

near the airbag modules on the steer-
ing wheel, instrument panel, and the
front passenger's panel above the
glove box, because any such object
could cause harm if the vehicle is in
a crash severe enough to cause the
airbags to inflate.

o If the airbags inflate, they must be

replaced by an authorized Hyundai
dealer.

o Do not tamper with or disconnect

SRS wiring, or other components of
the SRS system. Doing so could re-
sult in injury, due to accidental infla-
tion of the airbags or by rendering
the SRS inoperative.

o If components of the airbag system

must be discarded, or if the vehicle
must be scrapped, certain safety
precautions must be observed. Your
Hyundai dealer knows these precau-
tions and can give you the neces-
sary information. Failure to follow
these precautions and procedures
could increase the risk of personal
injury.

!

WARNING:

o If your car was flooded and has

soaked carpeting or water on floor-
ing, you shouldn't try to start the
engine; have the car towed to an
authorized Hyundai dealer.

Summary of Contents for 2008 Accent


















































































































































































































































































Reviews:

No comments

Related manuals for 2008 Accent

Uniden BTSC1500 Owner'S Manual preview
BTSC1500
Brand: Uniden Pages: 16
Uniden BTSC1500 User Manual preview
BTSC1500
Brand: Uniden Pages: 20
Quadratec QuadraTop Adventure Top S Installation Manual preview
QuadraTop Adventure Top S
Brand: Quadratec Pages: 20
Carax HUD CRX-3001 Quick Start Manual preview
HUD CRX-3001
Brand: Carax Pages: 2
Blue Ox BX3781 Installation Instructions Manual preview
BX3781
Brand: Blue Ox Pages: 7
Shad NADSA ATV80 Owner'S Manual preview
NADSA ATV80
Brand: Shad Pages: 3
U.S. General 95904 Operating Instructions preview
95904
Brand: U.S. General Pages: 4
MAcarbon Ferrari 360 Map Carbon Light Installation Instructions preview
Ferrari 360 Map Carbon Light
Brand: MAcarbon Pages: 4
Draw tite 24943 Installation Instructions preview
24943
Brand: Draw tite Pages: 4
Mercedes-Benz CLS 280 2008 Owner'S Manual preview
CLS 280 2008
Brand: Mercedes-Benz Pages: 329
Metra Electronics 99-5819 Installation Instructions Manual preview
99-5819
Brand: Metra Electronics Pages: 8
I.D. Systems Vehicle Asset Communicator User Manual preview
Vehicle Asset Communicator
Brand: I.D. Systems Pages: 41
BrandMotion FLTW-7511 Installation Manual preview
FLTW-7511
Brand: BrandMotion Pages: 6
r.LiNK RL2-NBT Manual preview
RL2-NBT
Brand: r.LiNK Pages: 20
Rugged Ridge 53701.52 Installation Manual preview
53701.52
Brand: Rugged Ridge Pages: 5
Hama 00173884 Operating Instructions Manual preview
00173884
Brand: Hama Pages: 13
Front Runner LATF002 Quick Start Manual preview
LATF002
Brand: Front Runner Pages: 7
Roadefend RDT401P Instruction Book preview
RDT401P
Brand: Roadefend Pages: 15

Brands by name

Popular brands

Load more brands