Hyundai 2008 Accent Owner'S Manual Download Page 184

Page: 184 / 273

WHAT TO DO IN AN EMERGENCY

D060C02MC

Flat tire

Block the wheel that is diagonally
opposite from the flat to keep the
vehicle from rolling when the car is
raised on the jack.

D060C01A-AAT

2. Block the Wheel

Remove the spare tire and remove the
jack and tool bag from the trunk.

NOTE:
The spare tire and tool is located
beneath the luggage mat in the ve-
hicle trunk or luggage compartment.

D060B01MC-AAT

1. Obtain Spare Tire and Tool

D060B01MC-A

D060K01FC-AAT

Wheel Cap (If Installed)

1. Wrap a piece of cloth around the tip

of the flat-head screwdriver to avoid
scratching.

2. Insert the flat-head screwdriver into

the notch of the wheel cap and pry
gently to remove the wheel cap.

3. Change the flat tire.
4. Reinstall the wheel cap by fitting

the boss of the wheel cap in the
notch of the wheel, hitting the cen-
ter of the wheel cap with your hand.

D060K02MC

Summary of Contents for 2008 Accent


















































































































































































































































































Search results

Summary of Contents for 2008 Accent

Reviews:

Related manuals for 2008 Accent

Brands by name

Popular brands

Hyundai 2008 Accent, Owner'S Manual

Search results

Summary of Contents for 2008 Accent

Reviews:

Related manuals for 2008 Accent

Brands by name

Popular brands