Hyundai 2008 Accent, Owner'S Manual

Page: 32 / 273

1
FEATURES OF YOUR HYUNDAI
20
To fold seatback down and seat
cushion up :
1. Slide the front seats forward and place
the seatbacks upright before folding
the rear seatback and cushion.
!
B080G01MC-AAT
Folding Rear Seatback and Seat
Cushion (3 Door)
For greater convenience, the entire
seatback may be folded down and the
seat cushion may be folded up.
WARNING:
The purpose of the fold-down rear seat
back and the fold-up rear seat cushion is
to allow you to carry more objects than
could be accommodated. Do not allow
passengers to sit on the cargo area
while the car is moving. This is not a
proper seating position and no seat belts
are available for use when the seat back
is folded down. This could result in seri-
ous injury or death in case of an accident
or a sudden stop. Objects should not
extend higher than the top of the front
seatbacks. This could allow cargo to
slide forward and cause injury or dam-
age during sudden stops.
!
WARNING:
When you return the rear seatback to its
upright position after being folded down:
Be careful not to damage the seat belt
webbing or buckle. Do not allow the seat
belt webbing or buckle to get caught or
pinched in the rear seat. Ensure that the
seatback is completely locked into its
upright position by pushing on the top of
the seatback. Otherwise, in an accident
or sudden stop, the seat could fold down
and allow cargo to enter the passenger
compartment, which could result in se-
rious injury or death.
When you return the seatback to its up-
right position, always be sure it has locked
into position by pushing on the top of the
seatback.
CAUTION:
!
o In order to prevent the center shoul-
der belt from being damaged while
folding the rear seat, disconnect the
metal tab (A) from the buckle (B). To
disconnect the metal tab (A) from
the buckle (B) , insert a narrow-ended
tool into the groove located on the
buckle(B).
B220D05MC