Hyundai 2007 Santa Fe Owner'S Manual Download Page 36

Page: 36 / 355

FEATURES OF YOUR HYUNDAI

3rd Row Seat (If Installed)

1. Move the 2nd row seatback to the for-

ward position.

2. Lower the headrest to the lowest posi-

tion.

3. To fold down the seatback, pull the

seatback folding lever and then push
down the seatback.

Double-folding the rear seat (2nd row)
(if installed)

To fold the rear seat forward to increase the
cargo area:

4. To return the seatback to its normal

position, reverse the above procedure.

OCM052037

1. Lower the headrest to the lowest posi-

tion.

2. Pull the seatback folding lever then

push down the seatback.

OCM052032

3. Pull the seat cushion release lever and

then fold up the seat cushion.

OCM052033

OCM052034

Summary of Contents for 2007 Santa Fe




































































































































































































































































































































































Search results

Summary of Contents for 2007 Santa Fe

Reviews:

Brands by name

Popular brands

Hyundai 2007 Santa Fe, Owner'S Manual

Search results

Summary of Contents for 2007 Santa Fe

Reviews:

Brands by name

Popular brands