manualshive.com logo in svg

Hyundai 2007 Santa Fe, Owner'S Manual

Share
Download
Hyundai 2007 Santa Fe Owner'S Manual Download Page 136

1

FEATURES OF YOUR HYUNDAI

124

PRESET SEEK
-

Preset station select.

TRACK UP/DOWN(

 / 

)

-

Press (

) once to skip forward to the

beginning of the next track.

-

Press (

) once to skip back to the

beginning of the track.

TRACK UP/DOWN(

 / 

)

-

Press (

) once to skip forward to the

beginning of the next track.

-

Press (

) once to skip back to the

beginning of the track.

MODE

RADIO

CDP

6CDC

Short Key (less than 0.8 sec)

Long Key (more than 0.8 sec)

SEARCH THE FREQUENCY
- Automatically tune to the next higher

or lower frequency.

FF(

)/REW(

)

- To fast forward or reverse through

the track, push and hold FF or REW
button.

- When you release the Button, the

CDP will resume playing.

DISC UP(

)/DOWN(

)

- Move forward or backward to the

next disc and playback automati-
cally begins.

- When switching CD's, the LCD dis-

plays the selected CD's number.

4.   /   (SEEK) Switch

Summary of Contents for 2007 Santa Fe




































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands