manualshive.com logo in svg

Hyundai 2007 Santa Fe, Owner'S Manual

Share
Download
Hyundai 2007 Santa Fe Owner'S Manual Download Page 147

1

FEATURES OF YOUR HYUNDAI

135

FEATURES OF YOUR HYUNDAI

135

135

135

135

B970C01CM-AAT

Automatic Operation

The FATC (Full Automatic Temperature
Control) system automatically controls
heating and cooling by doing as follows:

1. Push the AUTO button. It is indicated by

AUTO on the display. The modes, fan
speeds, air intake and air-conditioning
will be controlled automatically by tem-
perature setting.

2. Turn the "TEMP" knob to set the desired

temperature.
The temperature will increase to the
maximum 90°F (32°C) by turning the
knob clockwise.
The temperature will decrease to the
minimum 62°F (17°C) by turning the
knob counterclockwise.

NOTE:

If the battery has been discharged or
disconnected, the temperature mode will
reset to Centigrade degrees.
This is a normal condition and you can
change the temperature mode from
Centigrade to Fahrenheit as follows;

OCM052098

OCM052101

OCM052062

Photo Sensor

Press the "MODE" and "DUAL" switch
simultaneously for 3 seconds.
The display shows that the unit of tem-
perature is adjusted to Centigrade or
Fahrenheit (°C  

→

→

→

→

→

 °F  or °F 

→

→

→

→

→

 °C).

NOTE:

Never place anything over the sensor
which is located on the instrument panel
to ensure better control of the heating
and cooling system.

Cmhma-1b.p65

3/20/2006, 4:59 PM

135

Summary of Contents for 2007 Santa Fe




































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands