manualshive.com logo in svg

Hyundai 2007 Santa Fe, Owner'S Manual

Share
Download
Hyundai 2007 Santa Fe Owner'S Manual Download Page 28

1

FEATURES OF YOUR HYUNDAI

16

!

B080B04A-AAT

Front Seat
Adjusting seat forward and rearward

To move the seat toward the front or rear,
pull the lock release lever upward. This will
release the seat on its track so you can
move it forward or rearward to the desired
position. When you find the position you
want, release the lever and slide the seat
forward or rearward on its track until it locks
into the desired position and cannot be
moved further.

HNF2032

SEATS

B080A02A-AAT

Adjustable Front Seats

!

WARNING:

o Never adjust the driver’s seat while

the vehicle is moving.  Any sudden or
unexpected movement of the seat
could cause you to lose control of the
vehicle resulting in an accident.  Only
adjust the driver’s seat when the ve-
hicle is stationary.

o Do not sit or lean unnecessarily close

to the air bag.  Position the seat so that
you can sit as far back as possible
from the air bag and still comfortably
reach all controls.

o Do not attempt to operate the main

switch on another door in opposing
directions at the same time. If this is
done, the window will stop and cannot
be opened or closed.

WARNING:

Summary of Contents for 2007 Santa Fe




































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands