manualshive.com logo in svg

Hyundai 2004 Tiburon, Owner'S Manual, Page: 79 / 224

Share
Download
Hyundai 2004 Tiburon Owner'S Manual Download Page 79

1

FEATURES OF YOUR HYUNDAI

66

Floor-Level

Air is discharged through the floor vents, wind-
shield defroster nozzle, side defroster nozzle,
side ventilator.
If the "Floor" mode is selected, the "Fresh"
mode will be activated.

Floor-Defrost Level

Air is discharged through the windshield defrost
nozzle, the floor vents, side defroster nozzle,
side ventilator.
If the "Floor-Defrost" mode is selected, the A/C
will be turn on automatically and "Fresh" mode
will be activated.

Defrost-Level

Air is discharged through the windshield defrost
nozzle, side defroster nozzle, side ventilator.
If the "Defrost" mode is selected, the A/C will
turn on automatically and "Fresh" mode will be
activated.

NOTE:

If the "Floor-Defrost" or "Defrost" mode is
selected, the air conditioning will not turn
off by pushing the A/C button.
If the air flow control is set to the defrost or
the floor-defrost mode, the A/C will be on
automatically and the A/C will not off until
the air flow control is set to the another

HGK023

HGK024

HGK025

Summary of Contents for 2004 Tiburon

































































































































































































































Reviews:

No comments