Home
/
Hyundai
/
2004 Tiburon
/
Owner'S Manual

Hyundai 2004 Tiburon, Owner'S Manual, Page: 192 / 224

Share

Page: 192 / 224

Hyundai 2004 Tiburon Owner'S Manual Download Page 192

6

DO-IT-YOURSELF MAINTENANCE

26

SPECIFICATION:

"H"
Horizontal center line of headlights from ground:
Low Beam: 26.7 in. (679mm)
High Beam: 26.5 in. (672mm)

"W"
Distance between each headlight center :
Low Beam: 47.3 in. (1,202mm)
High Beam: 38.0 in. (966mm)

"L"
Distance between the headlights and the wall
that the lights are tested against : 118 in. (3,000
mm)

REPLACEMENT OF LIGHT BULBS

!

G260A02A-AAT

Before attempting to replace a light bulb, be sure
the switch is turned to the "OFF" position.
The next paragraph shows how to reach the
light bulbs so they may be changed. Be sure to
replace the burned-out bulb with one of the
same number and wattage rating.

See page 6-35 for the wattage description.

CAUTION:

Keep the lamps out of contact with petro-
leum products, such as oil, gasoline, etc.

G270A01GK-AAT

Headlight and Front Turn Signal Light

1. Allow the bulb to cool. Wear eye protection.
2. Open the engine hood.
3. Always grasp the bulb by its plastic base,

avoid touching the glass.

4. Disconnect the power cord from the bulb

base in the back of the headlight.

HGK823

«
...
190
191
192
193
194
...
»

Summary of Contents for 2004 Tiburon

































































































































































































































Reviews:

No comments