manualshive.com logo in svg

Hyundai 2004 Tiburon, Owner'S Manual, Page: 184 / 224

Share
Download
Hyundai 2004 Tiburon Owner'S Manual Download Page 184

6

DO-IT-YOURSELF MAINTENANCE

18

CHANGING THE AIR CONDITIONER
FILTER

B760B01GK-AAT

(If installed)

1. Remove the mounting screws on the down-

side of the glove box.

2. Open the glove box and remove the mount-

ing screws on the upside of the glove box.

3. Remove the filter cover.

HGK250

HGK251

HGK253

When the air conditioning is being used regu-
larly, the compressor drive belt tension should
be checked at least once a month with the
engine turned off.
To check the drive belt tension, press down on
the belt halfway between the engine crankshaft
and compressor pulleys. Pressing with your
finger, you should not be able to deflect this belt
anymore than 1/3 of an inch. If you have the
instruments to check it, with a force of 22
lb.(98N), the deflection should be 0.315 inches
(approx 8.0 mm). If the belt is too loose, have it
adjusted by your Hyundai dealer.

G140D01A-AAT

Checking the Compressor Drive Belt

G140D01GK

DOHC CVVT

V6

Crank pulley

A/C

Tension pulley

Eng.pulley

COMP

0.315 in.
(8 mm)

Auto tensioner

Summary of Contents for 2004 Tiburon

































































































































































































































Reviews:

No comments