background image

1

FEATURES OF YOUR HYUNDAI

97

o When driving your vehicle, be sure to

keep the volume of the unit set low
enough to allow you to hear sounds
coming from the outside.

o Do not expose this equipment (includ-

ing the speakers and tape) to water or
excessive moisture.

!

CAUTION:

o Do not insert warped or poor quality

discs into the CD player as damage to the
unit may occur.

o Do not insert anything like coins into the

player slot as damage to the unit may
occur.

o Do not place beverages close to the

audio system. The playback mechanism
may be damaged if you spill them.

o Do not impact on the audio system, or

the playback mechanism could be dam-
aged.

o Driving on the off-roads or other vibra-

tions may skip your compact disc.
Do not use the audio system on off-
roads as the discs could be scratched
and damaged.

o Do not grip or pull out the disc with your

hand while the disc is being pulled into
the unit by the self loading mechanism.
These can cause poor disc scratching to
occur or trouble in the compact disc
player.

o Avoid using CD-Recordable or CD-

Rewritable as the player could not be
operated in recording way of the CD
maker. When using the compact disc
player, genuine CDs are recommended.

Summary of Contents for 2004 Tiburon

































































































































































































































Reviews: