manualshive.com logo in svg

Hyundai 2004 Santa Fe, Owner'S Manual

The Hyundai 2004 Santa Fe Owner's Manual is your comprehensive guide to understanding and maintaining your vehicle. With just a few clicks, you can easily download this manual for free from manualshive.com, ensuring you have all the necessary information at your fingertips to navigate and care for your Santa Fe.

Share
Download
background image

6

DO-IT-YOURSELF MAINTENANCE

1 8

AIR CONDITIONING CARE

When the air conditioning is being used regu-
larly, the compressor drive belt tension should
be checked at least once a month with the
engine turned off.
To check the drive belt tension, press down on
the belt halfway between the engine crankshaft
and compressor pulleys. Pressing with your
finger, you should not be able to deflect this belt
anymore than 1/3 of an inch. If the belt is too
loose, have it adjusted by your Hyundai dealer.

G140D02A-AAT

Checking the Compressor Drive Belt

HSM396

2.7 V6

2.4  DOHC

COMP

Auto tensioner

Eng.pulley

Eng.pulley

COMP

0.315 in.

G140D02L

3.5 V6

Crank shaft apulley

A/C pulley

Power steering pulley

Generator

!

G140A01A-AAT

Keeping the Condenser Clean

The air conditioning condenser (and engine
radiator) should be checked periodically for
accumulation of dirt, dead insects, leaves, etc.
These can interfere with maximum cooling ef-
ficiency. When removing such accumulations,
brush or hose them away carefully to avoid
bending the cooling fans.

G140C01A-AAT

Lubrication

To lubricate the compressor and the seals in the
system, the air conditioning should be run for at
least 10 minutes each week. This is particularly
important during cool weather when the air
conditioning system is not otherwise in use.

G140B01A-AAT

Checking the Air Conditioning Opera-
tion

1. Start the engine and let it run at a fast idle for

several minutes with the air conditioning set
at the maximum cold setting.

2. If the air coming out of the in-dash vents is

not cold, have the air conditioning system
inspected by your Hyundai dealer.

CAUTION:

Running the air conditioning system for
extended periods of time with a low refrig-
erant level may damage the compressor.

Summary of Contents for 2004 Santa Fe






























































































































































































































































Reviews:

No comments

Related manuals for 2004 Santa Fe

Genesis Multiple G9F18 AU000 Quick Start Manual preview
Multiple G9F18 AU000
Brand: Genesis Pages: 3
B-Speech Sima User Manual preview
Sima
Brand: B-Speech Pages: 4
M7 SPEED AGS-R2 Manual preview
AGS-R2
Brand: M7 SPEED Pages: 6
Xhorse VVDI User Manual preview
VVDI
Brand: Xhorse Pages: 48
Brodit ProClip 854208 Manual preview
ProClip 854208
Brand: Brodit Pages: 2
Bestop Bikini Installation Instructions preview
Bikini
Brand: Bestop Pages: 5
PowerMadd Tri-mount Installation Instructions preview
Tri-mount
Brand: PowerMadd Pages: 3
Oypla Leisure 4269 User Manual preview
4269
Brand: Oypla Leisure Pages: 4
Mercedes-Benz 240 D 1979 Owner'S Manual preview
240 D 1979
Brand: Mercedes-Benz Pages: 91
ORA XL MIRROR Installation Instructions Manual preview
XL MIRROR
Brand: ORA Pages: 7
IOGear GBHFK201W6 User Manual preview
GBHFK201W6
Brand: IOGear Pages: 38
Green Valley 601951 Instructions Manual preview
601951
Brand: Green Valley Pages: 17
Car-Interface CI-RL4-R40 Manual preview
CI-RL4-R40
Brand: Car-Interface Pages: 25
Coulomb Technologies ChargePoint CT500-DSTAND Installation Manual preview
ChargePoint CT500-DSTAND
Brand: Coulomb Technologies Pages: 26
Saab 2007 9-7X Owner'S Manual preview
2007 9-7X
Brand: Saab Pages: 498
Road Ranger ET 210207 Installation Instruction preview
ET 210207
Brand: Road Ranger Pages: 3
DV8 FBBR-04 Installation Manual preview
FBBR-04
Brand: DV8 Pages: 14
JVC KV-K1017 Installation & Connection Manual preview
KV-K1017
Brand: JVC Pages: 12

Brands by name

Popular brands

Load more brands