background image

1

FEATURES OF YOUR HYUNDAI

4

DOOR LOCKS

!

B040A01A-AAT

B030C01Y-AAT

ILLUMINATED IGNITION SWITCH
(If installed)

Whenever a door is opened, the ignition switch
will be illuminated for your convenience, pro-
vided the ignition switch is not in the "ON"
position.
The light will go off approximately 10 seconds
after closing the door or when the ignition switch
is turned on.

B030C01L

WARNING:

o Unlocked doors can be dangerous. Be-

fore you drive away (especially if there
are children in the car), be sure that all the
doors are securely closed and locked so
that the doors cannot be opened from
the inside. This helps ensure that the
doors will not be opened accidentally.
Also, when combined with the proper
use of seat belts, locking the doors helps
keep occupants from being ejected from
the car in case of an accident.

o Before opening the door, always look for

and avoid oncoming traffic.

B030B01A-AAT

Record Your Key Number

A code number is stamped on the number plate
that came with the keys to your Hyundai. This
key number plate should not be left with the  keys
but kept in a safe place, not in the vehicle. The
key number should also be recorded in a place
where it can be found in an emergency.
If you need additional keys, or if you should lose
your keys, your authorized Hyundai dealer can
make new keys if you can supply the key
number.

B030B01B

Summary of Contents for 2004 Santa Fe






























































































































































































































































Reviews: