manualshive.com logo in svg

Hyundai 2004 Accent, Owner'S Manual

The Hyundai 2004 Accent Owner's Manual is a comprehensive guide for owners of this popular compact car. Find everything you need to know about operating and maintaining your vehicle, available for download free of charge from our website. Enjoy hassle-free access to your manual at manualshive.com.

Share
Download
background image

3

4

WHAT TO DO IN AN EMERGENCY

IF THE ENGINE OVERHEATS

!

!

WARNING:

While the engine is running, keep hands,
long hair and clothing away from moving
parts such as the fan and drive belts to
prevent injury.

D030A02A-AAT

If your temperature gauge indicates overheat-
ing, you experience a loss of power, or hear loud
pinging or knocking, the engine is probably too
hot. If this happens, you should:

1. Pull off the road and stop as soon as it is safe

to do so.

2. Place the gear selector lever in "P" (auto-

matic), or neutral (manual transaxle) and set
the parking brake. If the air conditioner is on,
turn it off.

3. If coolant is running out under the car or

steam is coming out from the hood, stop the
engine. Do not open the hood until the  cool-
ant has stopped running or the steaming has
stopped. If there is no visible loss of coolant
and no steam, leave the engine running and
check to be sure the engine cooling fan is
operating.  If the fan is not running, turn the
engine off.

4. Check to see if the water pump drive belt is

missing. If it is not missing, check to see that
it is tight. If the drive belt seems to be
satisfactory, check for coolant leaking from
the radiator, hoses or under the car. (If the air
conditioner had been in use, it is normal for
cold water to be draining from it when you
stop).

5. If the water pump drive belt is broken or

coolant is leaking out, stop the engine im-
mediately and call the nearest Hyundai deal-
er for assistance.

WARNING:

Do not remove the radiator cap when the
engine is hot. This may allow coolant to be
blown out of the opening and cause serious
burns.

6. If you cannot find the cause of the overheat-

ing, wait until the engine temperature has
returned to normal. Then, if coolant has been
lost, carefully add water to the reservoir
(Page 6-7) to bring the fluid level in the
reservoir up to the halfway mark.

7. Proceed with caution, keeping alert for  fur-

ther signs of overheating. If overheating hap-
pens again, call a Hyundai dealer for assis-
tance.

Then attach the other end of that cable to a
solid metal part of the engine away from the
battery. Do not connect the cable to any
moving part.

4. Start the engine in the car with the booster

battery and let it run for a few minutes. This
will help to assure that the booster battery is
fully charged. During the jumping operation,
run the engine in this vehicle at about 2000
rpm.

5. Start the engine in the car with the dis-

charged battery using the normal starting
procedure. After the engine starts, leave the
jumper cables connected and let the engine
run at fast idle or about 2000 rpm for several
minutes.

6. Carefully remove the jumper cables in the

reverse order of attachment.

If you do not know why your battery became
discharged (because the lights were left on,
etc.), have the charging system checked by
your Hyundai dealer.

Summary of Contents for 2004 Accent














































































































































































































Reviews:

No comments

Related manuals for 2004 Accent

Baja Designs S8 Instructions Manual preview
S8
Brand: Baja Designs Pages: 6
Cadillac ESCALADE - BROCHURE 2009 Personalization Manual preview
ESCALADE - BROCHURE 2009
Brand: Cadillac Pages: 24
Cadillac Escalade Personalization Manual preview
Escalade
Brand: Cadillac Pages: 20
Cadillac Escalade 2016 Convenience/Personalization Manual preview
Escalade 2016
Brand: Cadillac Pages: 20
FANATEC Porsche 911 Turbo S Wheel Developer Quick Manual preview
Porsche 911 Turbo S Wheel
Brand: FANATEC Pages: 9
RaceChip XLR User Manual preview
XLR
Brand: RaceChip Pages: 20
Chevrolet Camaro 12000 1968 Series Factory Assembly Instruction Manual preview
Camaro 12000 1968 Series
Brand: Chevrolet Pages: 455
SuperATV AAB-P-RZR900-K2-001 Installation Instructions preview
AAB-P-RZR900-K2-001
Brand: SuperATV Pages: 3
Thule 1308 Instructions Manual preview
1308
Brand: Thule Pages: 8
Whispbar K728W Fitting Instructions Manual preview
K728W
Brand: Whispbar Pages: 85
Fortin Evo All THAR-FOR3 Installation Manual preview
Evo All THAR-FOR3
Brand: Fortin Pages: 7
Prorack K544 Fitting Instructions Manual preview
K544
Brand: Prorack Pages: 20
Jeep Cherokee 1977 Owner'S Manual preview
Cherokee 1977
Brand: Jeep Pages: 136
SAN HIMA SGBR015 Installation Instructions Manual preview
SGBR015
Brand: SAN HIMA Pages: 10
Hudson 1933 Eight Owner'S Manual preview
1933 Eight
Brand: Hudson Pages: 34
Over Armour Offroad TX-STAMP-4-FC04 Instructions For Installation And Care preview
TX-STAMP-4-FC04
Brand: Over Armour Offroad Pages: 9
Belkin F8V9017 User Manual preview
F8V9017
Brand: Belkin Pages: 2
ULTIMATE SPEED 279619 Instructions For Use And Safety Manuallines preview
279619
Brand: ULTIMATE SPEED Pages: 40

Brands by name

Popular brands

Load more brands