manualshive.com logo in svg

Hyundai 2004 Accent, Owner'S Manual

The Hyundai 2004 Accent Owner's Manual is a comprehensive guide for owners of this popular compact car. Find everything you need to know about operating and maintaining your vehicle, available for download free of charge from our website. Enjoy hassle-free access to your manual at manualshive.com.

Share
Download
background image

1

FEATURES OF YOUR HYUNDAI

66

NOTE:

It should be noted that prolonged opera-
tion of the heating system in            mode will
give rise to misting of the windshield and
side windows and the air within the passen-
ger compartment will become stale. In ad-
dition prolonged use of the air condition-
ing with the         mode selected may result
in the air within the passenger compart-
ment becoming excessively dry.

Bi-Level

Air is discharged through the face vents and
the floor vents. This makes it possible to have
cooler air from the dashboard vents and warmer
air from the floor outlets at the same time.

B670D02A-1

B670D01A-1

Face-Level

Selecting the "Face" mode will cause air to be
discharged through the face level vents.

B670D03A-AAT

Air Flow Control

This is used to direct the flow of air. Air can be
directed to the floor, dashboard outlets, or wind-
shield. Five symbols are used to represent  Face,
Bi-Level, Floor, Floor-Defrost and Defrost air
position.

HLC2082

Summary of Contents for 2004 Accent














































































































































































































Reviews:

No comments

Related manuals for 2004 Accent

Gardigo MARTEN-FREE CAR Instruction Manual preview
MARTEN-FREE CAR
Brand: Gardigo Pages: 36
Jeep UNIVERSAL CJ-2A Operation Data preview
UNIVERSAL CJ-2A
Brand: Jeep Pages: 27
Jeep RENEGADE 2016 User Manual preview
RENEGADE 2016
Brand: Jeep Pages: 228
Jeep PATRIOT 2013 User Manual preview
PATRIOT 2013
Brand: Jeep Pages: 108
Jeep PATRIOT 2013 Owner'S Manual preview
PATRIOT 2013
Brand: Jeep Pages: 525
Warrior Products 10936 Installation Instructions preview
10936
Brand: Warrior Products Pages: 3
Fabbri BICI OK 2 Quick Start Manual preview
BICI OK 2
Brand: Fabbri Pages: 4
Dakota Digital Retrotech RTX-68D-CHG Quick Start Manual preview
Retrotech RTX-68D-CHG
Brand: Dakota Digital Pages: 4
Chevrolet 1999 Malibu Owner'S Manual preview
1999 Malibu
Brand: Chevrolet Pages: 344
Prorack K692 Fitting Instructions Manual preview
K692
Brand: Prorack Pages: 15
Ford 2004 Navigator Owner'S Manual preview
2004 Navigator
Brand: Ford Pages: 368
Fab Fours VI-COWL Installation Instructions Manual preview
VI-COWL
Brand: Fab Fours Pages: 19
aci ADARAC Aluminum M Series Installation Instructions Manual preview
ADARAC Aluminum M Series
Brand: aci Pages: 16
Imiola HAK-POL O/018 Quick Manual preview
O/018
Brand: Imiola HAK-POL Pages: 3
Toyota Sienna 2021 Manual preview
Sienna 2021
Brand: Toyota Pages: 600
Alfa Romeo 1966 Spider 105 Faq preview
1966 Spider 105
Brand: Alfa Romeo Pages: 46
Flash Cover MN019 Instructions preview
MN019
Brand: Flash Cover Pages: 2
Porsche WTY 2010 Warranty & Maintenance Manual preview
WTY 2010
Brand: Porsche Pages: 98

Brands by name

Popular brands

Load more brands