SERVICE MANUAL
Applies to:
Hyundai Coupe/Tiburon
1998-2000
GROUP
Restraints
SRS Air Bag System
Return to Main Menu(s):
Mechanical Manual Electrical Manual
INFLATOR MODULES (DAB, PAB)
Both DAB (Driver airbag) and PAB (Passenger airbag) module are comprised of inflator and cushion. The initiator
(A gas generator igniting device) is assembled in the inflator. When the vehicle is in a frontal crash of sufficient force
to close the sensor of SRSCM, current is developed through the deployment loop. Current passing through the
initiator ignites the material in the DAB and PAB module simultaneously and inflates the airbag.
When removing the air-bag module or handling a new airbag module, it should be placed with the pad top surface
facing up. In this case, the twin-lock type connector lock lever should be in the lock state and care should be taken to
place it so the connector will not be damaged. Do not store a steering wheel pad on top of another one. (Storing the
pad with its metallic surface up may lead to a serious accident if the airbag should inflate for some reason.)
Never measure the resistance of the airbag squib. (This may cause the airbag to deploy, which is very dangerous.)
Store the air-bag module where the ambient temperature remains below 93°C (290°F), without high humidity and
away from electrical noise.
When using electric welding, disconnect the airbag connectors under the steering column near the MULTI-
FUNCTION SWITCH connector before starting work.
SRS HARNESS
The SRS harness is wrapped in yellow tube to be discriminated from other system harness. And the shorting bar is
included inside the wiring connectors of both DAB and PAB inflator side. The shorting bar shorts the current flow
Summary of Contents for 2001 Tiburon
