SERVICE MANUAL
Applies to:
Hyundai Coupe/Tiburon
1998-2000
GROUP
Restraints
SRS Air Bag System
Return to Main Menu(s):
Mechanical Manual Electrical Manual
DTC - B1352, B1353
DTC CODE
DISPLAY ON SCAN TOOL CONDITION
B1352
PAB resistance - High
Ignition switch "ON" or start release
kPAB module circuit resistance > 2.8 -
5.4OHM
B1353
PAB resistance - Low
Ignition switch "ON" or start release
kPAB module circuit resistance > 0.4 -
1.6OHM
CHECK ITEMS
Open circuit in passenger airbag harness
PAB module malfunction
SRS control module malfunction
CHECK PROCEDURES
The SRSCM shall measure the resistance of the PAB to detect a resistance which lies outside the allowed range.
Never attempt to measure the resistance of PAB.
Before inspection,
Disconnect the battery negative (-) terminal cable and wait at least 30 second to prevent unexpected deployment of
airbag.
Remove the DAB and PAB connectors.
INFLATOR CIRCUIT (PAB)
Disconnect SRSCM connector, DAB and PAB.
Connect the SRS harness checker to the inflator connector and SRSCM harness side connector.
Check the continuity between the terminals of checker, and the LIMIT is as following.
Terminals B1352
B1353
7 to 15
Continuity
-
8 to 16
Continuity
-
15 to 16 -
Non-continuity
CAUTION
Keep the surface of airbag module facing upward.
Summary of Contents for 2001 Tiburon
