![background image](http://html.mh-extra.com/html/hyundai/110d-9/110d-9_manual_2196420202.webp)
7-33
If the gasket was removed, install the gasket into
the rocker lever cover groove starting with the
tab end first. Then install the corners opposite
the gasket tab end. Finish by pushing in the
sides (see illustration).
Gently push the gasket down into the groove. Do
not used a finger to trace the gasket around into
the groove during installation, as this will stretch
the gasket, making it difficult to fully seat into the
groove.
Do not cut the gasket to make it fit into the
groove, as this will result in an oil leak.
The gasket must be fully seated around the
entire perimeter of the rocker lever cover
groove.
1
5
2
3
4
7609A6MI28
(8)
侍
Apply clean engine oil to the O-rings on the
crankcase breather filter.
Install the filter onto the rocker lever cover.
7609A6MI29
(9)
Install the crankcase breather filter cover.
Install the filter cover capscrews.
Tighten the capscrews, starting with the inner-
most capscrews and working outward in a
circular manner.
余
0.71 kgf
余
m (5.16 lbf
余
ft)
Install the oil fill cap.
Cap
Cover
Capscrew
7609A6MI30
(10)