![background image](http://html.mh-extra.com/html/hyundai/110d-9/110d-9_manual_2196420116.webp)
3-58
Bluetooth setting
Setting the automatic call answer feature
If this function is selected, the bluetooth radio automatically answers all INCOMING calls.
This feature enhances safety as the driver does not need to take their hands from the steering
wheel to accept an INCOMING call.
Note that this feature cannot be set at different settings for each of the paired mobile phones.
Press SEND button to select BLUETOOTH mode.
Turn selection knob until SETTINGS is displayed.
·
ANSWER OFF = Automatic answer function is not active.
·
ANSWER 5 SEC = Automatic answers all INCOMING calls after a 5 second delay.
·
ANSWER 10 SEC = Automatic answers all INCOMING calls after a 10 second delay.
·
RETURN = Return to previous menu.
After making your selection, press SEL button to store the selection.
SETTINGS is then displayed for adjustment if required.
If you do not wish to adjust any further bluetooth settings, press END button
to return to the last
selected mode.
①
a.
b.
e.
f.
g.
ANSWER OFF ANSWER 5 SEC ANSWER 10 SEC RETURN ANSWER OFF
Setting calling voice volume
This function is to set the level of the mobile phone’s calling voice volume to be heard through the
bluetooth radio and speakers.
Follow steps a. to c. of above setting below
①
.
When VOICE VOLUME appears on the display, press SEL button to display the current level of
the calling voice. Turn selection knob right or left to adjust the calling voice volume as desired. This
is the level the calling voice volume will be set to each time the bluetooth radio is used after the
stating switch is turned off and then on again.
After making your selection, press SEL button to store the selection.
SETTINGS is then displayed for adjustment if required.
If you do not wish to adjust any further bluetooth settings, press END button to return to the last
selected mode.
Setting the ring volume
This function is to set the level of the mobile phones ring tone volume to be heard through the
bluetooth radio and speakers.
After making your selection, press SEL button to store the selection.
When RING VOLUME appears on the display, press the SEL button to display the current level of
the ring tone. Turn selection knob right or left to adjust the ring tone volume as desired. This is the
level the ringer volume will be set to each time the bluetooth radio is used after the starting switch
is turned off and then on again.
After making your selection, press SEL button to store the selection.
The press END button to return to the last selected mode.
②
a.
b.
c.
d.
e.
a.
b.
c.
d.
(4)
③
Press SEL button until AUTO ANSWERING is displayed.
Press SEL button and turn selection knob. The LCD then displays as follows :
c.
d.