P a g e
| 23
6. STARTING THE ENGINE
1) Unscrew the priming plug and prime the pump with water until the water is
overflowing. Do this whilst the water pump is set on a firm, level ground.
2) Move the fuel valve lever to the 'ON' position.
3) If the engine is cold, move the choke lever to the 'CLOSED' position.
4) Position the throttle lever about 1/3 of the way between the 'SLOW' and
'FAST' position, so that it is closer to the 'SLOW' position.
RUN
START
RUN
START
Summary of Contents for 1 inch
