Hyundai power products HYRM1000, Instruction Manual

Page: 38 / 48

38
Maintenance & Care
1. Check and clean mower regularly once a
week.
2.
When you first start using the mower,
the blade plate, protection plate and blades
should be checked once a month.
3. It is important that the blade rotates easily.
Additionally, if the blades are fixed, the blade
plate must rotate easily.
4.
Blade edges should not be damaged. Blade
life depends on the type of grass, soil, lawn,
etc.
5. Working will dull blades gives a poor
mowing results, which needs more power
to mow, therefore the mower can only cover
smaller area.
6. Charge the battery fully at the end of the
season before winter storage. If storage time
is longer than one year, please recharge the
mower again.
7. On a regular basis, check that the screws
are properly tightened.
8.
To be sure the machine is in safe working
condition, keep all nuts, screws and bolts
tight. Routine maintenance is essential for
safety and for maintaining a high performance
level.
9. Check for damage after each use.
10.
If any warning message stickers or
instruction is damaged, replace them.
Daily Maintenance
CAUTION -
The lawnmower will remain
hot for a while after use. Ensure the machine
has cooled before carrying out any
maintenance or storage.
!
WARNING -
Whilst cleaning or doing
maintenance work, you need to wear proper
clothing and protective gloves whenever your
hands are at risk.
WARNING -
If there are worn or
damaged parts, never use the machine. Faulty
or worn-out parts must be replaced and not
repaired. You must only use original spare
parts. The use of non-original and/or
incorrectly fitted parts will jeopardize the
safety of the machine. This may also cause
accidents or personal injuries for which the
manufacturer is under no circumstance liable
or responsible.
WARNING - Any maintenance operations
or adjustments not explained in this manual
must be carried out by your Dealer or a
specialised Service Centre with the necessary
knowledge and equipment to ensure that the
work is done correctly maintaining the
machine’s original safety level. Any operations
performed in unauthorised centres or by
unqualified persons will invalidate the
Warranty and all obligations and
responsibilities of the Manufacturer.
!
!
IMPORTANT - Routine and accurate
maintenance is essential for maintaining
original machine safety and performance
levels.
!
!
WARNING-
Be very careful during
adjustment of the machine to prevent
entrapment of the fingers between moving
parts and fixed parts of the machine.
!