Hyundai power products HYRM1000, Instruction Manual

Page: 20 / 48

20
Assembly
STEP 6
The low voltage cable (from transformer to
charging station) may cross the working area.
It must be either pegged down or buried. In
some cases there is a better positioning
option for the dock station, for example, close
to a house wall.
STEP 7
Avoid placing the dock station in a narrow
passage (narrower than about 2m).
STEP 8
Avoid placing the dock station near a water
tap.
STEP 9
Avoid the power adapter being exposed to
direct sunlight.
STEP 10
Make sure the dock station entrance is
pointing in a counter-clockwise direction. To
allow the mower
to travel back to its base in a
clockwise direction for battery charging .
Connecting The Dock Station
STEP 1
Place the dock station in a suitable position.
STEP 2
Secure the dock station to the ground using
the large screws supplied. (1,2,3,4).
CAUTION
Do not secure the dock station to the
ground with screws before boundary wire
and adapter cable connected with dock
station.
!
STEP 3
Connect the low voltage cable to the dock
station.
STEP 4
Connect the power adapter power cord to a
100-240V wall socket.