Hyundai power products HYRM1000, Instruction Manual

Page: 22 / 48

22
Installation
• Use a wooden hammer to knock the pegs in the ground. Take care when hammering pegs
and make sure the wire is flat on the lawn; the distance between pegs should be approximately
100cm. At corners, the distance between pegs should be 30-50cm.
• Do not let the boundary wire loop around itself.
• If you intend to bury the boundary wire, make sure to place the boundary wire between 1mm
and 15mm into the ground; the boundary wire should not be looped under the ground.
Max.
40m