Hyundai power products HYC1600E Instruction Manual Download Page 43 | Manualshive

Page: 43 / 48

background image

Useful Information

43

Check Out Our YouTube Channel

Our videos on YouTube include:
• Unboxing • Assembly of your machine • How to service your machine • Products in use
• ‘How To’ videos • Product features • And more.

Go to www.hyundaisupport.co.uk or search ‘Hyundai Power Products’ in YouTube.

Warranty

Proof of purchase will be required before you make a warranty claim.

Full warranty terms and conditions can be found on the HYUNDAI POWER PRODUCTS website:
www.hyundaipowerproducts.co.uk

Manual Updates

Our manuals are constantly being reviewed and updated. Should you find an error, omission or
something unclear, please contact us for assistance.

We reserve the right to make any modifications without prior notice whenever necessary.

Our latest manuals are also placed online. All our manuals can be downloaded at:
www.hyundaipowerproducts.co.uk

Returning Your Product

If you are returning your product, please contact the dealer for their returns policy.

Leaving A Review

We work very hard to give all of our customers the best possible service. If you have any
problems, before leaving negative feedback, please contact us to give us a chance to resolve the
issue. We would be delighted if you left us positive feedback!

To leave a review, please go to:
uk.trustpilot.com/review/hyundaipowerequipment.co.uk

Ordering Spare Parts

Only use original spare parts: The use of non-original and/or incorrectly fitted parts will jeopardize
the safety of the machine, may cause accidents or personal injuries for which the Manufacturer is
under no circumstance liable or responsible.

«
...
41
42
43
44
45
...
»

Summary of Contents for HYC1600E

















































Reviews:

No comments

Related manuals for HYC1600E

Brand: McCulloch Pages: 2

Brand: Echo Pages: 28

Brand: EMAK Pages: 186

Brand: Nakayama Pages: 26

Brand: Yard Machines Pages: 64

Brand: Mafell Pages: 65

Brand: Tanaka Pages: 68

Brand: Gardenline Pages: 20

Brand: Garland Pages: 60

SUNJOE SWJ804E-RM

Brand: SNOWJOE Pages: 20

SUNJOE SWJ802E-RM

Brand: SNOWJOE Pages: 20

SUNJOE iON100V-10PS-CT-RM

Brand: SNOWJOE Pages: 28

CS-3000 TYPE 1E

Brand: Echo Pages: 24

CS-3000 TYPE 1 -

Brand: Echo Pages: 23

CS-300, CS-340, CS-345

Brand: Echo Pages: 24

Power Plex 51880

Brand: Toro Pages: 24

Brand: smania Pages: 3

Brand: Swift Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands