manualshive.com logo in svg

Hyundai power products HYC1600E, Instruction Manual

Share
Download
Hyundai power products HYC1600E Instruction Manual Download Page 21

21

      WARNING - Make sure that you have read and understood all the safety warnings 
before continuing with the assembly.

      WARNING - Make sure that the chainsaw is disconnected from the mains supply during 
all checks and adjustments.

!

!

1. Place the chainsaw on a stable and flat surface.

2. Unscrew and remove the oil filler cap.

3. Fill the oil tank with chainsaw oil using a funnel.

4. Refit the oil filler cap. Wipe up any spillage before continuing. The oil level should be checked 
frequently during use and topped up as necessary. Using the saw without chainsaw oil will 
damage the chain, sprocket and bar.

Filing With Oil

Assembly

Assembly Safety

       

CAUTION -

 This guide is meant to serve as a quick reference for operating your HYUNDAI       

machine. We always advise reading the manual in full before operation.

       

NOTE -

 Images may vary depending on model. 

       NOTE - 

The machine can be supplied with some parts already assembled. Prior to 

assembly, check all items have been received.

!

!

!

NOTE - 

The machine is delivered without oil in the machine. All machines are tested and 

inspected so there may be some residual oil left in the machine so please fill with caution.

Summary of Contents for HYC1600E

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands