Subject to change without notice.
Edition: 26 Feb. 2020 Ver. A0 Page 2/7
The motion detected by the master unit HMW38/RF passes to all other units programmed on the same group via RF transmission. The
transmission can reach 30 meters indoor and 50 meters in open areas. A daylight sensor is also built-in to prevent the light switching
on when surrounding natural light is sufficient.
RF receiver
serves as slave only, which turns on the light after receving the RF “ON” signal from the master.
RF antenna
Rotary switch
Infrared remote receiver
1-10V+
1-10V
L’
N N L
Installation hole
-
71.5
4.2
37.5
38.3
25
11.8
78.2
87
HC034RF (1-10V output, RF grouping by rotary switch or remote control)
C. Attach to the shade by clamp
B. Screw to the Luminaire by conduit
59.6
66.6
89.9
0.825”
75
64
59.3 57.3
35.2
47.5
Sensor module
Daylight sensor
LED indicator
Infrared receiver
Rotary switch
Angle adjustment
Luminaire clamp
84.5
59.3
ぶ
29
163.2
66.6
75
33.7
15
28.5
4.5
ぶ
4.5
59.6
Sensor module
Daylight sensor
LED indicator
Infrared receiver
Rotary switch
Cable entry
Note: We recommend the mounting distance between sensor to sensor should be more than 4m to prevent sensors from
false-triggering.
