Subject to change without notice.
Edition: 26 Feb. 2020 Ver. A0 Page 3/7
Intelligent Photocell (daylight detection prior to motion detection)
2
The built-in photocell will also automatically turn off the light when the ambient natural light exceeds the programmed lux level for
more than 5min, regardless of whether motion is detected or not. This feature can be disabled if it is required that the fixture stays at
dimmed level during absence.
With insufficient natural light, the sensor
switches on the light automatically when
presence is detected.
With sufficient natural light, the light
does not switch on when presence is
detected.
The sensor switches off the light when
natural light is sufficient, even with
presence.
5
0
12
Detection Pattern
Ambient daylight
threshold
One-Key
Commissioning
Photocell
Intelligent
Rotary Switch
Grouping
Functions and Features
Photocell Advance
TM
868
FSK mode
Tri-level Control (Corridor Function)
1
Hytronik builds this function inside the motion sensor to achieve tri-level control, for some areas which require a light change notice
before switch-off. The sensor offers 3 levels of light: 100%-->dimmed light (natural light is insufficient) -->off; and 2 periods of
selectable waiting time: motion hold-time and stand-by period; Selectable daylight threshold and freedom of detection area.
Sensor
Sensor
min 6m
Distance Recommended between Sensors
Pay attention: The RF signal could be affected by big metal
plate & wireless devices such as GSM mobile antenna, strong
Wifi signal, ultra high-voltage cable which emits frequent
electromagnetic waves radiation, which may interfere with the
RF transmission and communication! Please always check the
application environment before mass installation!
We recommend the mounting distance between sensors to be
more than 6m to avoid sensors from being false-triggered.
