
FOR MORE INFORMATION
HYTORC Nederland BV
| Platinawerf 8 - 6641 TL Beuningen - NEDERLAND | Tel: +31(0)24 - 3 660 660 | www.hytorc.nl
HYTORC Benelux BVBA
| Ysselaarlaan 65B - 2630 Aartselaar - BELGIË | Tel : +32(0)38 - 705 220 | www.hytorc-benelux.be
ENG-versa- User manual.docx
Version 2.5 / Mar-16
4
Stay clear during operation.
In most cases, the tool will allow “hands free” operation. If
the tool must be held or steadied during operation, use alternative means of securing the
tool to the application.
Guard against electric shock
.
Ensure the pump is properly grounded and the proper
voltage is being used.
Store equipment properly.
When not in use, tools and accessories should be properly
stored to avoid deterioration.
Use right tool.
Do not force small tools or attachments to do the job of a larger tool. Do
not use a tool for purposes not intended.
Proper safety attire
. When handling/operation hydraulic equipment use work gloves, hard
hats, safety shoes and other applicable clothing.
Use safety glasses with side covers.
Moving equipment
.
Do not use hydraulic hoses, uni-swivels, pump power or remote
cords as means of moving the equipment.
Maintain your HYTORC equipment with care.
For top performance, inspect tools, power
pack and accessories for visual damage frequently and always prior to use. Always follow
instruction for proper tool and pump maintenance. Refer to the Operations Maintenance
Section in chapter 10 for further clarification.
Stay alert!
Watch what you are doing. Use Common sense. Do not use power equipment
under the influence of any mood altering substances.
Prior to operation:
-
Ensure that all hydraulic connections are securely connected and there is no leakage;
-
Verify that the hydraulic hoses are not kinked or otherwise damaged;
-
Ensure the square drive and its retainer are fully and securely engaged;
-
Be certain that all connectors, elbows, fitting and swivels are not bent, loose or
damaged.
Prior to use:
-
Check sockets for size, quality and flaws (do not use if questionable);
-
Cycle tool to ensure proper function;
-
Locate a solid, secure reaction point;
-
Be sure the reaction arm retaining clamp is fully engaged;
-
Be sure the hydraulic hoses are free of the reaction point;
-
Pressurize the system momentarily; if the tool tends to “ride up" or to “creep", stop and
re-adjust the reaction arm to a more solid and secure position.
Stay away of the reaction points.
Remain clear of the reaction arm during operation and
never punt body parts between reaction arm and reaction surfaces!
Summary of Contents for VERSA 1
Page 1: ...USER MANUAL VERSA series Model 1 Model 2...
Page 18: ......