S826/6
6. The installation must be carried out in accordance with the
requirements of EN 60079-14 the latest relevant electrical and local
authority regulations and standards.
7. It must not be used with any liquids or applications other than those
specified. We will accept no warranty claims or liability if it is used for
other liquids or applications.
8. This product must not be used if it is damaged.
SPECIFICATION
MAINS VERSION
- 230V 3-channel alarm.
- IP55 weatherproof enclosure, for outside mounting.
- Each channel can be used as an overfill, low level or bund alarm.
- High power alarm sounder.
- High visibility flashing zenon beacon.
- Test button checks float switches as well as beacon & sounder.
BATTERY VERSION
- Battery 3 channel alarm.
- Each channel can be used as an overfill, low level or bund alarm.
- High power alarm sounder.
- No zenon beacon, but individual channel LED’s.
- Test button checks float switches as well as batteries & sounder.
- Battery life depends on number of test & alarm incidents.
INSTALLATION INSTRUCTIONS
MOUNTING
The float switch assembly is supplied with 5 metres of 2-core PUR fuel
resistant cable that may be extended, as necessary, up to 100 metres.
1. Remove front display lid from alarm box and disconnect ribbon cable.
Place the lid somewhere clean and safe.
2. Using wall-mounting bracket, fix alarm box into position.
3. Self-adhesive product labels are supplied and are to be fixed alongside
the corresponding channel LED indicator on the front of the alarm unit.
