S902/3
8. The totaliser display will show the
following in a looping sequence
STD ALONE
- Pump external serial
interface not used.
NET
- To set the pump identity number
(1-8) if serial interface used to connect
to a fuel control system.
EXT ID
- To set the pump identity
number (1-16) if serial interface used to
connect to fuel control system.
Press calibration button once when
desired option is displayed.
a. If NET or EXT ID were selected
above, the pump identity number must
be selected from the looping sequence.
Press calibration button once when
desired option is displayed.
b. The totaliser display will show the
following in a looping sequence:
BR 9600
RS485
communication
Baud rate 9600
BR 19200
RS485
communication
Baud rate 19200
BR 38400
RS485
communication
Baud rate 38400
9. If STD ALONE was pressed in 8. above
the totaliser display will show NOZZLE.
To save any changes made so far but to
avoid carrying out the following 20 litre
calibration, press the calibration button
once to continue directly to point 12.
below.