S902/3
ERRORS
If an error occurs
ERROR
(followed by a number) is shown on the
totaliser display. The error codes are classified as follows:
ERROR 1
The pulser has run too fast (in excess of 300 pulses
per second)
ERROR 2
The meter has turned without the nozzle being
removed
ERROR 3
A time delay of 60 seconds or more has occurred
between any of the stages of the calibration sequence
ERROR 4
One of the pulse transmitter’s pulse trains has been
interrupted.
ERROR 5
The meter has run backwards during a delivery
ERROR 6
The pulser has been disconnected
The error condition is maintained until the nozzle is returned to its
holster, for at least 2 seconds, and then removed again to restart the
fuelling sequence.
