Fetco CBS-2131 XTS User Manual Download

Page: 1 / 34

FETCO®, LUXUS®, EXTRACTOR®, INTERMITTENT BREW, and Driven To Innovation™

are trademarks or trade names of Food Equipment Technologies Company.

P114

Version1

Octo

ber 2012

NOTICE TO INSTALLER: Please leave this book with the machine.

www.fetco.com

User’s Guide

Table of Contents

Contact Information ........................................................2

Description & Features ...................................................2

Specifications..................................................................2

Requirements .................................................................2

Weights Capacities and Measurements.........................3

Electrical Configuration and Brewing Efficiency .............3

Installation.......................................................................5

Accessing batch and programming menu screens ........8

Operating Instructions...................................................10

Programming- operator access programming..............12

Hot water convenience tap ...........................................17

Adjustable spray pattern ...............................................17

Error Codes...................................................................17

Airpot use instructions and cleaning.............................18

Parts diagrams, bill of materials lists ............................22

Wiring diagrams............................................................33

Models:

CBS-2131

CBS-2132

3 liter and 1 gallon airpot brewers

Summary of Contents for CBS-2131 XTS



































Search results

Summary of Contents for CBS-2131 XTS

Reviews:

Related manuals for CBS-2131 XTS

Brands by name

Popular brands

Fetco CBS-2131 XTS, User Manual

Search results

Summary of Contents for CBS-2131 XTS

Reviews:

Related manuals for CBS-2131 XTS

Brands by name

Popular brands