NOTE:
When connecting the lift/lower hose, be
sure it is in correct position as shown in Figure 13.
5.
Remove all caps and plugs from control valve
and hose fittings. Connect hydraulic hoses to
the control valve as noted during removal. See
6.
Connect the cowl wiring harness to the top
PPRV solenoids as noted during removal.
7.
Apply adhesive compound, (Hyster P/N
251099), to the three mounting capscrews. Us-
ing the three capscrews that hold the throttle
base to the cowl, install the pedal assembly on
the lift truck. Connect the cowl wiring harness
to the pedal assembly wiring harness. Tighten
the bolts to 19 to 25 N•m (168 to 221 lbf in).
See Figure 15.
8.
Install the dashboard, seal plate, kick panel,
and floor plate. See Frame 0100SRM1891
9.
Perform the calibration procedures described in
the section .
A.
90° ±5°
Figure 13. Lift/Lower Hose Orientation
Main Control Valve Repair
2000 SRM 1899
18