Inspect
Inspect the transition control valve section mating
surfaces and any open bores for damage. If damage
is found, replace the transition control valve sec-
tion.
If the clipper relief valve is not working correctly,
contact your dealer.
NOTE:
If the transition control valve section is not
to be reassembled immediately, coat surfaces with
clean hydraulic oil to prevent the possibility of rust.
Cover the transition control valve section with a
clean, dry, lint-free cloth to prevent the possibility
of contaminants entering the transition control
valve section.
NOTE:
TAMPER PROOF CAP FOR CLIPPER RELIEF VALVE NOT SHOWN FOR CLARITY.
1. EMERGENCY LOAD LOWERING VALVE
2. O-RING
3. TRANSITION CONTROL VALVE SECTION
Figure 10. Transition Control Valve Section
2000 SRM 1899
Main Control Valve Repair
15