2200 SRM 1324
Technician Menu
Pump Motor and Valve
The Pump Motor and Valve menu provides the fol-
lowing information about the lift system:
• Pump Motor Voltage
• Pump Motor Current (in amps)
• Valve Current (in milliamps)
To exit the Pump Motor and Valve menu, press both
the RH LOWER [#4] and LH LOWER [#1] switches
and hold until the next diagnostic menu is present,
or cycle the key switch to return the lift truck to RUN
mode. See Figure 17.
Figure 17. Hydraulic Motor/Valve Screen
Control Handle
The Control Handle menu provides information
about the control handle outputs: Truck Throttle,
Lift Pump Speed, and Vertical Angle. These speed
outputs will be shown as a percentage of the full
speed of the device.
See Figure 18.
To exit the
Control Handle menu, press both the RH LOWER
[#4] and LH LOWER [#1] switches and hold until
the next diagnostic menu is present or cycle the key
switch to return the lift truck to RUN mode.
Figure 18. Control Handle Screen
Traction Temps
The screen shows the traction motor internal tem-
perature and the controller internal temperature in
degrees Fahrenheit. See Figure 19. To exit the Tem-
peratures menu, press both the RH LOWER [#4] and
LH LOWER [#1] switches and hold until the next di-
agnostic menu is present or cycle the key switch to
return the lift truck to RUN mode.
Figure 19. Temperatures
13