2200 SRM 1324
Technician Menu
CHANGE SUPERVISOR PASSWORD
NOTE:
To disable a service password enter "10000"
in the ETACC box value and download.
Use this menu to enter or change any passwords. See
Figure 22. To enter a new password at the Passwords
screen, enter the appropriate digit in the highlighted
area of the display. Use the LH LOWER [#1] and
LH LIFT [#2] switches to raise or lower the number
to any digit between 1 and 5. Use the RH LOWER
[#4] switch to move and highlight the next digit to be
entered. Use the RH LIFT [#3] switch to return and
highlight a previous entry. Repeat until all five digits
of your password have been entered. Press the RH
LOWER [#4] switch to move to the Password Con-
firm menu. Use the RH LIFT [#3] switch to return to
the Enter New Password menu. Use the LH LOWER
[#1] and LH LIFT [#2] switches to scroll between the
Save And Exit or Exit Without Saving choices. Press
the RH LOWER [#4] switch to return to the Techni-
cian Menu.
Figure 22. Change Supervisor Password Screen
OPERATOR MODES
The Operator Modes function gives a service techni-
cian (or a supervisor) the means to either allow or
deny the lift truck operator’s access to change the op-
erating mode on the lift truck.
The lift truck is set in one of four operating modes.
A service technician (or a supervisor) can lock the
lift truck into its current operating mode by enter-
ing the Operator Modes menu and selecting LCK. If
the function is set to ON, the lift truck operator will
have access to change the operating mode selection
for the lift truck.
To edit the Operator Modes function, enter the Oper-
ator Modes menu and select the Operator Mode set-
tings by pressing the RH LOWER [#4] switch. Scroll
to either ON or LCK using the LH LOWER [#1] or LH
LIFT [#2] switch. When complete, back out one level
using the RH LIFT [#3] switch and scroll down using
the LH LOWER [#1] or LH LIFT [#2] switch to either
the Save And Exit or Exit Without Saving selections.
Press the RH LOWER [#4] switch to select. If Save
And Exit is selected, Confirm will appear on the dash
display. Scroll down beside Confirm and press the
RH LOWER [#4] switch to save your selection and to
return to the Technician Menu. See Figure 23.
Figure 23. Operator Modes Screen
15
