2200 SRM 1324
General
General
DESCRIPTION
NOTE:
Some menu functions are only accessed
through the dash display by using a technician-level
password. These functions include truck speed set-
tings, acceleration rates, and audible/visual alarm
settings.
NOTE:
The initial setup of the supervisor password
must be performed by a service technician accessing
the menu system with a technician-level password.
The supervisor password must be entered before a
supervisor can gain access to the menu functions.
The dash display is a multifunction device. It con-
tains a truck status LED and an LCD which displays
the performance mode indicator and a battery charge
indicator. The dash display menu system can be ac-
cessed by starting the truck in service mode and en-
tering the proper password. See Figure 1.
DASH DISPLAY MENU ACCESS
(STANDARD HANDLE)
Start up the lift truck in service mode to access the
dash display menu system:
1.
Simultaneously depress and HOLD the RH
LIFT switch and the HORN switch (located on
the control handle). See Figure 5.
2.
Turn the key switch to the ON position.
3.
Release the lift and horn switches.
The Enter Password screen will now appear on the
LCD. See Figure 2. At the Enter Password screen,
enter your five-digit Service Technician password.
The default Service Technician password is 55555.
To enter your password at the Enter Password
screen, enter the appropriate digit in the highlighted
area of the display. See Figure 2. Use the LH LIFT
switch to increase the number to any digit between
1 and 5. Use the LH LOWER switch to decrease the
number. Use the RH LOWER switch to move to and
highlight the next digit to be entered. Use the RH
LIFT switch to return to and highlight a previous
entry. Repeat until all five digits of your password
have been entered. While on the final digit, press
the RH LOWER switch to enter the password. Upon
successful entry of your technician-level password,
you will be directed to the Technician Menu.
Figure 1. Dash Display
Figure 2. Enter Password Screen
1
