manualshive.com logo in svg

HyperVision DHV series, User Manual

Share
Download
HyperVision DHV series User Manual Download Page 55

 

51

(9)

 

Click “

OK

” when you have done the setting. 

(10)

 

You can add another alarm notice by repeating the step (5) to (9). 

 

[

Motion to Zoom]

 

You can click the camera No which you want to enable the “ Motion to Zoom” function. 

 

[Alarm to Voice Dialer] 

This function requires an external Voice Dialer to send alarm messages to phones. HyperVision 

Series Ver 4.0 and above only supports 

Voyager

 Voice Dialer.   

(1)

 

Please refer to 

Voyager

 Voice Dialer user manual for the physical connections. 

(2)

 

Go to the “

Voice Dialer

” setting in the 

System

 sub-menu to set the phone number 

which you want to let the DVR auto dial out. You can enter three phone numbers to be 

notified for a single alarm.

 

(3)

 

Go to 

Serial Port

 setting in the 

System

 sub-menu. Choose 

Voice Dialer

 on the COM 

port that connects to the 

Voice Dialer

.

 

 

Note: 

 

 

 

 

 

 

 

z

 

You can send the same alarm notice via email, FTP, SMS and Voice Dialer at the 

same time. You can also modify or delete your previous alarm notice setting. It is 

very similar to add a new alarm notice.

Summary of Contents for DHV series










































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands