manualshive.com logo in svg

HyperVision DHV series, User Manual

Share
Download
HyperVision DHV series User Manual Download Page 2

ii 

HyperVision

       Card Kit User Manual 

1st Edition 

Nov, 2006 

 

Copyright © 2000-2006 

H

yperVision Inc.

   

 

All rights reserved. 

This material, information and instructions for use contained herein are 

the property of 

HyperVision Inc.

 No part of this manual, including the products and software 

described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or 

translated into any languages in any form or by any means, except documentation kept by the 

purchaser for backup purposes, without the express written permission of 

HyperVision Inc.

 

 

Liability. 

HyperVision Inc.

 provides this manual “AS IS” without warranty of any kind, either 

express or implied, including but not limited to the implied warranties or conditions of 

merchantability or fitness for a particular purpose. In no event shall 

HyperVision

 

Inc.

, its 

directors, officers, employees or agents be liable for any indirect, special, incidental, or 

consequential damages (including damages for loss of profits, loss of business, loss of use or 

data, interruption of business and the like), even if 

HyperVision Inc.

 has been advised of the 

possibility of such damages arising from any defect or error in this manual or product. 

Specifications or information contained in this manual are furnished for informational use only, 

and are subject to change at any time without notice, and should not be constructed as a 

commitment by 

HyperVision Inc.

 

HyperVision Inc.

 assumes no responsibility or liability for 

any errors or inaccuracies that may appear in this manual, including the products and software 

described in it. 

 

Trademarks. 

Product and cooperate names appearing in this manual may or may not be 

registered trademarks or copyrights of their respective companies, and are used only for 

identification or explanation and to the owners’ benefit, without intent to infringe. 

 

Translated material. 

Any discrepancies, errors or omissions in non-English versions of this 

manual should be referenced to the English version for clarification. 

 

 

 

J&S CCTV 

P. O. Box 51-40 

Taipei, 

Taiwan R.O.C.

 

 

Telephone:    

 

+886 

(2) 

2720 

4402 

Fax: 

     

 

+886 

(2) 

2720 

8653 

World Wide Web: 

 

   

http://www.jscctv.com

 

Email – Sales & Enquires:     

[email protected]

 

Email – Technical Support:    

[email protected]

 

Summary of Contents for DHV series










































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands